TDS Conductivity Meter
MODEL : TDS 101
Display : 16 Character x 2 Line LCD Display
Range : 00.00 - 19.99 ppm / 00.00 - 19.99 μS
Operating Environment : 0 - 50°C / 5 to 95 % RH Non condensing
- Introduction
- Specifications
- Key Features
- Accessories
Product Details
SANSEL TDS 101 Model TDS / Conductivity Meter that offer high accuracy, wide range of TDS / conductivity & temperature measurement in a single unit. User friendly features such as simultaneous temperature display, auto ranging, adjustable TDS factor, temperature Co - efficient, and automatic / manual temperature compensation makes TDS and Conductivity measurements as quick and easy. These technologically advanced meter build with easy 4 point calibration steps and adjustable cell constant.
| Model | TDS 101 |
|---|---|
| Display | 16 Character x 2 Line LCD Display |
| Range | 00.00 - 19.99 ppm / 00.00 - 19.99 μS |
| Accuracy @ 25ºC | ± 1% of range for TDS & Conductivity / ± 0.5ºC for Temperature |
| Resolution (minimum) | 0.01 ppm to 0.01 ppt / 0.01 μS to 0.01 mS (Auto) & 0.1º C |
| Measuring parameter | TDS / Conductivity (User Selectable) & Temperature ( º C ) |
| Calibration | Manual 4 Point for TDS & Conductivity / Error Adj. for Temperature |
| Operating Environment | 0 - 50°C / 5 to 95 % RH Non condensing |
| Temperature Compensation | 0 - 150ºC Manual / Automatic |
| Cell Constant | 0.1 / 1.0 (Selectable) |
| TDS Conversion Factor | 0.4 to 1.0 (Adjustable) |
| Temperature Co - efficient | 0.0 to 15.0% (Adjustable) |
| Power supply | 90 to 270V AC / 50 Hz |
| Standard Accessories | Operation manual, Conductivity Cell (electrode), stand set, electrode clip |
| Overall Dimension in mm | 185(W)x 190(D)x 75(H) mm |
| Instrument Weight | 1 kg(Approx.) |
Note: Due to continuous product improvements, Published specifications may change with out notice
Micro controller based high accuracy- Three parameter in one unit
- Quick and easy calibration for full range upto 4 point push button calibration.
- Auto ranging measurement
- Adjustable TDS factor & temperature Co-efficient
- Selectable cell constant
- Selectable Automatic / Manual temperature compensation
- Non-volatile memory to hold your setting and calibration points, when power is OFF.
- 16 character x 2 line LCD display.
- ±1% of range accuracy.
Standard Delivery
- 1.Basic Instrument
- 2.Platinum conductivity cell
- 3.Electrode Clamp & stand set
- 4.Instruction manual
- 5.ATC sensor compensation
Optional
- 1.Imported certified Standard Solution
