- Home
- / TCAL 1501 / - 40
Liquid Temperature Calibration Bath
TCAL 1501 / - 40
SANSEL series TCAL 1501/- 40 is a micro controller based precision “LOW TEMPERATURE LIQUID BATH” generates true reference temperature with high resolution and stability. The temperature controller of the bath uses a auto tune FUZZY PID controller algorithm. This fast response closing follows the cooling curve of an actual thermal system.
Place the thermometers and thermocouple & RTDs to be calibrated in the bath. Set the temperature from the 3.5 inch true TFT display with touch screen . Both liquid and set temperature can be read. When stabilization occurs, simply read the temperature and re-calibrate the thermometer, sensor etc., or comparison with master RTDs reading.
3.5 inch True TFT display with Touch screen
Range from – 40 to 50°C
Resolution 0.1°C
Stability ± 0.05°C
Radial uniformity better than ± 0.2°C
Stability time & status indication provided
Multi hole provision for different type of sensors, sensor with Indicators & Thermometer calibrations.
- Model: TCAL 1501/ - 40
- Display: 3.5 inch True TFT LCD Display with Touch screen
- Temperature Range: -40 to 50°C
- Resolution: 0.01°C
- Heating & Cooling medium: ETHYLENE GLYCOL HOCH2CH2OH purity 99% (3litres) + Pure distilled water (1.5 litres ) for range from - 40 to 50 °C
- Stability: ± 0.05°C
- Uniformity: ± 0.2°C
- Stabilization Time: 15 minutes
- Heating time: 30 mins
- Cooling time: 60 mins (amb. (25°C to - 40°C ) @25°C
- Multi hole PP top cover: Provided for test Thermometer or sensor holding
- Power supply: 230V AC 50/60Hz
- Power Consumption: 1300 VA
- Calibration chamber size: 90 W x 120 H x 175 D mm
- Overall Dimension: 530 x 340 x 670 (L x W x H) (+155mm circulation motor) (Approx.)
- Weight: 52 kg (without liquid)
- Basic Instrument
- Top multi hole PP chamber cover
- Top SS Dummy cover
- Spare Fuses
- Instruction Manual
- Test Certificate
- Mains Card
