- Home
- / Products
Dry Block Temperature Calibrator
TCAL 1501 / 300
TCAL 1501 / 300
“SANSEL” series TCAL 1501 / 300 is a micro controller based precision “DRY BLOCK” temperature calibrators generates true reference temperature. The temperature controller of the calibrators uses a auto tune FUZZY PID controller algorithm. This response closely follows the heating curve of an actual thermal system.
Place the Thermocouples, RTDs - type (PT 100, K, R, S, B, etc.) to be calibrated in the calibrator. Set the temperature from the 4.3 inch true TFT display with touch screen. Both Block and set temperature can be read. When stabilization occurs, Simply read the temperature and re-calibrate the Thermocouples, sensor etc,. or comparison with master Thermocouple / RTDs reading.
- 4.3 inch True TFT DISPLAY with touch screen
- Range from Amb. to 300°C
- Micro Controller Based Linearized High Accuracy
- Resolution 0.01°C
- Uniformity better than ± 0.3°C
- Stability 0.03°C
- Portable & Rugged
- Windows Based Software
- No Liquids, Safe dry Calibration
- Touch Screen - Easy to use
- Temperature Switch Test
- NABL Traceable Calibration Certificate
- Model: TCAL 1501 / 300
- Display: 4.3 inch True TFT LCD Display with Touch screen
- Temperature Range : Amb. to 300°C
- Resolution: 0.01°C
- Stability: ± 0.03°C
- Radial uniformity: Better than ± 0.2°C
- Measure inputs: RTD-PT 50, 100, PT 1000 / TC - J, K, R, S, T, E, B , N / mA, mV, ohms
- Temperature Readout: C
- Stabilization Time: 15 minutes
- Heating time: 30 mins (25 to 600°C)
- Cooling time: 50 mins (600 to 100°C )
- Well Dimension: 30 x 150 mm (dia x height)
- Test sensor immersion depth: 140 mm
- Standard well holes in mm: 5.1, 6.2, 6.2 & 8.1
- PC Interface (optional): RS 232 with automatic calibration software
- UUC Sensor supply output: 24V DC ± 10% / 50mA max.
- Power supply: 230V AC ± 10% / 50Hz (optional 110V AC)
- Power Consumption: 1200 VA
- Switch test: Provided
- Overall Dimension in mm: 285 x 155 x 330 (L x B x H) (Approx.)
- Weight: 8.5 kg (without well insert) (Approx.)
Due to continuous product improvements, Published specifications may change with out notice
Standard Delivery
Basic Instrument
Spare Fuses
Mains Card
Cable for Thermostat Switch Test
Instruction Manual
Tool for Insertion Tube
Dry Block Insert Well
Traceable Calibration Certificate
Carrying Case
Optional
110V AC 60Hz Power supply
Additional Thermowells / Insertion Tubes (as per customer requirements)
Reference Standard Thermocouple
