- Home
- / Products
SANSEL offers PIJ - 542 A1 Model PROCESS INDICATORs are extremely versatile Indicators that can be used for a wide variety of applications. These Instrument offer extreme reliability and low cost for Process measurement and logging. PIJ - 542 A1 is a Microprocessor based instrumentation ensures accurate readings for all Linear Parameters. A number of programmable features including In-line calibration are standard. All the parameters are saved in a non volatile EEPROM memory which doesn't needs any external battery. PIJ-542 A1 can offer relay outputs for signals exceeding set points. Programmable Re Transmission output models are also available in addition to the industry standard 4 -20mA or 0 - 10V DC output. Optional RS 485 (2 wire ) output also provided for PC communication with PC Interface software & also with MODBUS RTU protocol.
TDS / Conductivity
Flow
pH / ORP
Temperature
Humidity
Voltage / Current / Power
Resistance and More
4” 4 Digit 7 segment RED LED display
High Accuracy
Compact Size
24 Bit ADC Resolution
Selectable Inputs RTD , all types of thermocouples , mA, mV , Voltage , ohms.
Wide Selectable Range between -1999 to 9999 counts
Easy Field Configurable with Front Key Calibration
No Hardware Selection For the Input Signals
Optional Opto Isolated Re Transmission Output.
24V DC External Sensor Supply
Model: PIJ - 542 A1
Analog Inputs: 0 - 20 mA, 0 to 70 mV, 0 to 10 V DC, 0 - 400 Ù (H & L Limit Programmable)
Display: 4” 4 Digit 7 segment RED LED<
Temperature Inputs:RTD - PT 100, Thermocouple - J, K, R, S, T, B, N, E
Analog Display Range: - 1999 to 9999 (H & L Limit Programmable)
Temperature Range (H & L Limit Programmable): RTD - PT 100 (-199.9 to 850.0°C / -199.9 to 999.9 °F
Hold delay: 0 - 999 sec (selectable)
Power Supply: 90 to 270 V AC / DC / 50 / 60 Hz
Over All Dimension: 171 (H) X 428 (W) X 85(D) mm (Approx.)
Housing: MS powder coating
Due to continuous product improvements, Published specifications may change with out notice