TDS / CONDUCTIVITY SENSORS are very accurate, rugged & economical for
Continuous Online Measurement for TDS & Conductivity.
This model sensors Provided 0 – 70 °C wide temperature range should With
stand the Pressure up to 6 bar with easy online fittings available on different
models.
The TDS 602 – 1 series of TDS Controller and Transmitter provides a
reliable method of Monitoring, Controlling & Transmitting 4 – 20mA / RS 485
MODBUS RTU Communication for Interfacing to PLC & Data logger. This
product is suitable to measure TDS in water treatment, Electrolytic water
cleaning, Chemical Industries, Food Process, Waste Water treatment, Textile
Industries & Neutralization process, etc.,.
This TDS Controller & Transmitter can Measured using Industrial TDS
Sensors, Temperature can be measured using temperature sensor. This TDS
Controller & Transmitter has many User Friendly and Safety Features Which
as Follows.
TDS Measurement and Regulation Read More »
6 Digit Seven Segment LED Display. Wide Range 999999 Counts. 3 to 30V DC Input Pulse from any type Sensor./ Allows Maximum 3.5 kHz Input Pulse Speed Low / Medium / High Speed Input Pulse selection. 2 Relay Output with Front Key Set table 2 High Set points. Front End Reset with Protection Cumulative Count Display.
10 Years Memory Backup . 12 V DC Sensor Supply. Universal Supply Voltage 90 to 270V AC / DC
SANSEL Model TCAL 1501 series of Dry well Temperature calibrator range from -30 to 1200 °C in four model (TCAL 1501 / -30, TCAL 1501 / 300, TCAL 1501 / 600 & TCAL 1501 / 1200) are high precision, better resolution, stability, fast in heating and cooling. More well dia and depth to calibrate more number of temperature sensor at a time with better uniformity. These models can meet any calibration requirement in laboratories or in on site applications. This models are inbuilt measuring facility of the Thermocouples, RTD, Resistance, millivolt & milliamps to directly read the signals from most of the temperature sensors, indicator with sensor and Transmitter. Temperature range from 200 to 1200 °C with high resolution 0.1 °C up to 1200 °C. This model is mainly used in all industries, like metal moulding, glass, ceramic & calibration laboratories etc., These models are using 4.3” True colour TFT display with Touch screen, easy to read multi parameter at the same time like, Block temperature, set temperature, measure value, Real time clock with date & time, Control Output %, Stability time & status, Range of the equipment with necessary unit of measurement and three soft touch keys are used for measure configuration, settings, calibration etc.., It has one more advantage of help menu for operating instruction of the equipment via the same screen , Hence no need of Hard copy of Instruction manual.
Temperature Control Read More »
The RPMC 1700 Series is high precision Tachometer calibrator, generates true reference rotation per minute (RPM). This calibrator uses “German technology” with high speed motor, high precision encoder and adoption of a new power full 32 bit CPU in control drive, featuring automated gain tuning function, stability, stable stop, rugged in use and many more. Due to it’s light weight and rugged Aluminium enclosure, it is suitable for in-house and on-site calibration of contact / non contact Tachometer, Tacho coil, Tacho generator, RPM indicator, RPM transmitter, Speedo meter, Proximity sensor, Stroboscope, etc,.
SANSEL offers PI 541A High precision universal process indicator
are extremely versatile Indicators that can be used for a wide variety of applications.
These Universal indicator offer high precision 6 digit resolution & extreme reliability
and low cost for Process measurement. PI541A is a Microprocessor based
instrumentation ensures accurate readings for all Linear Parameters, RTD, ohms &
different type of Thermocouples. A number of programmable features including In-line
calibration are standard.
PI541A can offer relay outputs for signals exceeding set points, optional
Programmable 4 -20mA or 0 – 10V DC Isolated output and also Optional RS 485 (2 wire )
MODBUS protocol output is provided .
UNIVERSAL PROCESS INDICATOR Read More »
SSPRT is Highly Accurate Platinum Resistance Thermometer(PT 100) offer the
temperature range of – 200 to 660ºC. SSPRT gives the benefit of high accuracy and
low drift in a solid metal case. Wire wound resistance element give good stability
with low temperature coefficient and high accuracy.
SSPRT is constructed with a 6 mm outer diameter of Inconel sheath of high
durability. SSPRT is available in different accuracies and length. A special powder
mixture is filled into the sensor capsule to support the element from mechanical
shocks.
STANDARD RTD SENSOR Read More »
SANSEL Model BCAL 40, Black body Calibrator is used to measure the accuracy and performance of non-contact fever detection systems, like medical thermometer & image scanner. Now it is being used in relation to COVID-19 (corana virus). This Blackbody Source meets the demand for a simple cost effective solution but high accurate device for the calibration of thermal imager and IR thermometers that are used at temperature around that of the human body. Unlike Heat only devices, This model uses a solid state Heat & cool Technology, so that this can be generate both Heat and Cool. This having benefits to maintain the block temperature in different ambient temperature. BCAL 40 using True colour 3.5” Touch screen display, easy to read multi parameter at the same time like Block temperature, Set temperature, Control status, Output % level, range of the equipment, displays both °C & °F and two Touch screen soft keys are used for settings and one more advantage of help menu to guide the operating Instruction of the equipment. Hence no need of hard copy of Instruction manual.
Black Body Radiation Source Read More »
SANSEL Model TCAL 1401 / 600 Dry well Temperature calibrator are high performance for industrial atmosphere and covering temperature range from Amb.+5 to 600°C. Which are ideally suited onsite calibration of thermocouple, RTDs, Indicator with sensors & 4-20mA signal transmitter with indicator in Food, Pharmaceutical and all types of process industries. Having it’s advantage of user friendly, light weight, portable, fast settling, better uniformity and accuracy over a wide temperature range. TCAL 1401 / 600 having interchangeable inserts to suit for calibration of different diameter of sensors (upto 30mm). Additional Inserts(optional) with special drillings are available to order.
Industrial Calibrator Read More »
“SANSEL” series TCAL 1501 / – 40 is a micro controller based precision “ LOW TEMPERATURE LIQUID
BATH” generates true reference temperature with high resolution and stability. The temperature controller of
the bath uses a auto tune FUZZY PID controller algorithm. This fast response closely follows the cooling
curve of an actual thermal system.
Place the Thermometers, Thermocouple & RTDs to be calibrated in the bath. Set the temperature from
the 4.3 inch true TFT display with touch screen. Both liquid and set temperature can be read. When stabilization
occurs, Simply read the temperature and re-calibrate the Thermometer, sensor etc,. or comparison with master
RTDs reading.
LOW TEMPERATURE CALIBRATOR Read More »
No. 1/46, Ganga Nagar, Maduravoyal, Chennai, Tamil Nadu-600095, India
+91 9840149675 | +91 9840149941
mm@sansel.net
www.sansel.net
No. 1/46, Ganga Nagar, Maduravoyal, Chennai, Tamil Nadu-600095, India
+91 9840149675 | +91 9840149941
mm@sansel.net
www.sansel.net
