SANSEL offers Process indicators are extremely versatile
Indicators that can be used for a wide variety of applications. These Instrument offer
extreme reliability and low cost for Process measurement and logging. PIJ – 542 B1 is a
Microprocessor based instrumentation ensures accurate readings for all Linear
Parameters. A number of programmable features including In-line calibration are
standard. All the parameters are saved in a non volatile EEPROM memory which doesn’t
needs any external battery.
PIJ-542 B1 can offer relay outputs for signals exceeding set points. Programmable
Re Transmission output models are also available in addition to the industry standard 4
-20mA or 0 – 10V DC output. Optional RS 485 (2 wire ) output also provided for PC
communication with PC Interface software & also with MODBUS RTU protocol.

6 Digit Seven Segment LED Display.
Wide Range 999999 Counts.
3 to 30V DC Input Pulse from any type Sensor.
Allows Maximum 3.5 kHz Input Pulse Speed.
Low / Medium / High Speed Input Pulse selection.
Front End Reset with Protection.
External Reset Options.
10 Years Memory Backup.
12 V DC Sensor Supply.
Universal Supply Voltage 90 to 270V AC / DC.

Clarity of water is extremely important in products destined for
human consumption. Suspension free water is also considered necessary for
industries manufacturing beverage, food products etc. Similarly, minimum
limits of turbidity are required to be observed in drinking water & sewage
disposals.
SANSEL Digital Nephelometer Model DN 1000 are ideal
instruments for measurement of suspensions. They consist of a light source
focused on a test tube containing the sample solution under test. The light,
reflected at right angle to the focused light by the suspension in the solution,
is detected by the photo electric detector, amplified and displayed on a 3½
digit LED display.

A large number of salts such as carbonates, bicarbonates,
chloride, sulphates , phosphates & nitrates of calcium, magnesium, sodium,
potassium, iron and manganese etc., are found dissolved in natural water.
Similarly coastal marine water contains substantial quantity of these salts. A
high content of dissolved solids elevates the density of water, influences
Osmoregulation of fresh water organism and reduces solubility of gases
thereby reducing the utility of water for drinking, irrigation and industrial
purposes. Therefore, determination of Total Dissolved solids is one of the
important parameters in water analysis.
SANSEL make digital TDS meter TDS 100 is extremely useful for fast
and accurate determination of Total Dissolved Solids in a liquid. The use of
solid state technology and IC circuitry makes this instrument versatile and
reliable.
The multi position selector switch quickly sets the digital display
to the desired test range.
The instrument is ideal for testing of natural water, drinking water,
waste water, brine solution, sea water and soluble salts, etc.,

The CC 603 – 1 series of Conductivity Controller and Transmitter provides
a reliable method of Monitoring, Controlling & Transmitting 4 – 20mA / RS
485 MODBUS RTU Communication for Interfacing to PLC, Data logger, HMI,
etc.,. This product is suitable to measure Conductivity in water treatment,
Electrolytic water cleaning, Chemical Industries, Food Process, Waste Water
treatment, Textile Industries & Neutralization process, etc.,.
This Conductivity Controller & Transmitter can Measured using Industrial
Conductivity Sensors, Temperature can be measured using temperature
sensor. This Conductivity Controller & Transmitter has many User Friendly
and Safety Features Which as Follows.

The most time-consuming part of carrying out a microbial count is the actual counting process on petri dishes. Colony counters facilitate this task and as a result are essential in every bacteriological laboratory. Their particular advantages are the easy, rapid and reliable counting of bacterial colonies with very simple handling. SANSEL colony counter Model CC 100 is easy to use and allows fatigue-free and safe work thanks to its problem-free counting mechanism: Marking the colonies on the petri dish with the marker pen activates the counter.
COLONY COUNTER MODEL : CC 100
“ Total Solution Under One Roof ” Manufacturing, Servicing & Calibration.