SANSEL Model BCAL 1202, Black body Calibrator is used to measure the accuracy and performance of non-contact Thermometers. Infra red thermometer & online pyrometer calibration is performed by comparison of the temperature measured by UUC and target temperature indicated by the calibrator or using standard pyrometer. Focus the Unit Under Calibration (UUC) to be Calibrate to the target point given in BCAL 1202. Set the Temperature from the Touch screen display. Both True and set Temperature can be read. When Stabilization Occurs, Simply Read the Temperature and re-Calibrate the UUC.

SANSEL offers PROCESS INDICATORs are extremely
versatile Indicators that can be used for a wide variety of applications. These
INSTRUMENT offer extreme reliability and low cost for Process measurement and
logging. PI 590 – 2 is a Microprocessor based instrumentation ensures accurate
readings for all Linear Parameters. A number of programmable features including Inline
calibration are standard. All the parameters are saved in a non volatile EEPROM
memory which doesn’t needs any external battery.
PI 590 – 2 can offer relay outputs for signals exceeding set points.
Programmable Re Transmission output models are also available in addition to the
industry standard 4 -20mA or 0 – 10V DC output.

• View the Count Display From Long Distance
• 3 to 30V DC Input From any type of Pulse O/P Sensor
• 4″ & 8″ Available in Different Segment Sizes (1″ & 2″ on Request)
• Different type of Mounting Wall, Selling, Panel, “L” Clamping
• 6 Digit Seven Segment LED Display
• Wide Range 999999 Counts
• Allows Maximum 3.5 kHz Input Pulse Speed
• NPN, PNP, LIMIT Switch,etc., differnet type of Input selection
• Front End Reset with Protection
• External Reset Options
• 10 Years Memory Backup
• 12 V DC Sensor Supply
• Supply Voltage 230V AC

SANSEL make online pH indicator Model pH 641 is a precis, rugged
and weather proof instrument carefully designed for the most accurate
measurement of pH in all industries. These instruments are completely IC version
using “MOSFET” input “OP -AMP” and CMOS ICs.
This instrument is a panel mountable with a compact standard size of 48 x 96 x
65mm with front end potmeter type easy adjustable 4pH & 7pH buffer calibration
option. This instrument operates from 90V to 270V AC / DC ,50Hz.

• pH Transmitter with ATC (Automatic temperature Compensation) in IP-65 Housing
• 2 Wire 4~20mA Isolated Output
• Galvanic Isolation : 1500VDC (Input / Output)
• Large LCD Display

pH Transmitter with ATC (Automatic temperature Compensation) in IP-65 Housing,
2 Wire 4~20mA Isolated Output,
Galvanic Isolation : 1500VDC (Input / Output),
Large LCD Display.