Precision Humidity Calibrator Large measuring chamber CALIBRATION SYSTEM Generates Stable Humidity Temperature conditions Easy to use multi color touch screen display Calibrate Temperature & RH probes and protable indicators simultaneously Temperature and relative Humidity are controlled independently
NABL accredited calibration certificate


Applications:
Calibration
Food & pharma industries
Chemical & petro chemical industries
Research & development labs
Calibration labs, etc

Temperature Dry Well Calibrator TCAL 1501 is a micro controller based precision “DRY BLOCK” temperature calibrators generates true reference temperature. The temperature controller of the calibrators uses a auto tune FUZZY PID controller algorithm. This response closely follows the heating / cooling curve of an actual thermal system. Place the sensor to be calibrated in the calibrator. Set the temperature from the 4.3 inch true TFT display with touch screen. Both Block, set and measure temperature can be read. When stabilization occurs, Simply read the temperature and re-calibrate the process system or sensor.

Infrared Black body Temperature Calibrator BCAL 1202 is a Micro controller Based Precision “BLACK BODY” Temperature Calibrators Generates True Reference Temperature. The Temperature Controller of the Calibrators Uses a Auto Tune PID Controller Algorithm. This Response Closely Follows the Heating Curve of an Actual Thermal System. FOCUS the Unit Under Calibration (UUC) to be Calibrate to the target point given in BCAL 1202. Set the Temperature from the Touch screen TFT LCD display. Both True and set Temperature can be Read.
When Stabilization Occurs, Simply Read the Temperature and Re-Calibrate the Process System. BCAL 1202 Calibrator may be Used for Calibration of all Type of Non contact Thermometers and online Pyrometers above 500 to 1200°C range.

SANSEL offers JUMBO INDICATORs are extremely versatile Indicators that can be used for a wide variety of applications. These Instrument offer extreme reliability and low cost for Process measurement and logging. PIJ – 542 A1 is a Microprocessor based instrumentation ensures accurate readings for all Linear Parameters. A number of programmable features including In-line calibration are standard. All the parameters are saved in a non volatile EEPROM memory which doesn’t needs any external battery. PIJ-542 A1 can offer relay outputs for signals exceeding set points. Programmable Re Transmission output models are also available in addition to the industry standard 4 -20mA or 0 – 10V DC output. Optional RS 485 (2 wire ) output also provided for PC communication with PC Interface software & also with MODBUS RTU protocol.

SANSEL offers JUMBO TEMPEARURE INDICATORs are extremely versatile Indicators that can be used for a wide variety of applications. These Instrument offer extreme reliability and low cost for Process measurement and logging. PIJ – 542 A1 is a Microprocessor based instrumentation ensures accurate readings for all Linear Parameters. A number of programmable features including In-line calibration are standard. All the parameters are saved in a non volatile EEPROM memory which doesn’t needs any external battery. PIJ-542 A1 can offer relay outputs for signals exceeding set points. Programmable Re Transmission output models are also available in addition to the industry standard 4 -20mA or 0 – 10V DC output. Optional RS 485 (2 wire ) output also provided for PC communication with PC Interface software & also with MODBUS RTU protocol.

Process Indicator are extremely versatile Indicators that can be used for a wide variety of applications. These INSTRUMENT offer extreme reliability and low cost for Process measurement and logging. It is a Microprocessor based instrumentation ensures accurate readings for all Linear Parameters. A number of programmable features including In-line calibration are standard. All the parameters are saved in a non volatile EEPROM memory which doesn’t needs any external battery. PI 542A can offer relay outputs for signals exceeding set points. Programmable Re Transmission output models are also available in addition to the industry standard 4 -20mA or 0 – 10V DC output. Optional RS 485 (2 wire ) output also provided for PC communication with PC Interface software & also with MODBUS RTU protocol.

Universal Input Datalogger 8/16/32 Channel Universal Touch Screen Data logger accept input RTD, Thermocouple , Voltage, Current. The Logger suitable for Temperature, Pressure , Humidity, Level, Flow , RPM, Voltage, Current, etc.,  The input is passed through suitable Software package. filters to eliminate unwanted  signals. This is a high performance series equipped to handle virtually any process documentation in mechanical and system engineering. Cold junction compensation is standard feature in thermocouple input. DL Series Universal Touch screen Data Logger provides memory approximately 25,000 records, communication port for PC interfacing and user friendly customized

Lab model TDS Meter “SANSEL make digital TDS meter is extremely useful for fast and accurate determination of Total Dissolved Solids in a liquid. The use of solid state technology and IC circuitry makes this instrument versatile and reliable. The multi position selector switch quickly sets the digital display to the desired test range. The instrument is ideal for testing of natural water, drinking water, waste water, brine solution, sea water and soluble salts, etc.,”

Lab model pH Meter “SANSEL make digital pH meter is a precis and rugged instrument Carefully designed for the most accurate measurement of pH in Laboratories and industries. The instruments are completely IC version using “MOFSET” input “OP – AMP” and CMOS ICS. It is a metal cabinet of elegant shape. All the controls that are in regular use have been incorporated in the front panel for operational easy. The instrument is capable of measuring millivolts with auto. Polarity for redox potentials and potentiometric tirations. Thi s instrument Operates from 180V to 230V AC 50Hz.”