- Home
- / Products
The pH 600 - 1 series of pH Controller and Transmitter provides a reliable method of Monitoring, Controlling & Transmitting 4 - 20mA / RS 485 MODBUS RTU communication for Interfacing to PLC, Data logger, HMI, etc.,. This product is suitable to measure pH in water treatment, Electrolytic water cleaning, Chemical Industries, Food Process, Waste Water treatment, Textile Industries & Neutralization process, etc.,.
This pH Controller & Transmitter can Measured using Industrial Combined pH Sensors, Temperature can be measured using temperature sensor. This pH Controller & Transmitter has many User Friendly and Safety Features Which as Follows.
Drinking Water plant
RO Water Treatment
Sewage Water
Food Industries
Pharmaceutical
Plating
Health Care
High temperature fermentor etc.,
Economical, Easy to Calibrate and Setup
Wide range from -2 to 16 pH
High Accuracy
Programmable Auto / Manual Temperature Compensation
Optional Isolated RS 485 communication with MODBUS RTU protocol
Optional Galvanically Isolated 4 - 20mA Re Trans. Output
Very High Input Impedance >1012 Ohms
User selectable Automatic and Manual calibration
User selectable 2 or 3 point buffer calibration
2 Relay Outputs with Configurable individual H / L Setting with 6 relay status
Optional audible inbuilt buzzer Output with front key reset
Universal Supply Voltage 90 to 270V AC / DC
Model: pH 600 - 1
Display: 4 + 4 Digit 0.5” & 0.39” 7 Seg RED LED Display
Input Impedence: 1012 Ohms
Range: -2 to 16 pH
Resolution: 0.01 pH
Temperature sensor: RTD - PT 100 (3 wire)
Temp. Compensation: Manual / Automatic (-20.0 to +150.0ºC)
Electrode Input: Combined Electrode with BNC Attachment
Accuracy: ± 0.01 pH ± 1 digit
Set Point - 1 & 2: Two Set Point with 6 Relay Status Selectable
Relay Output: Relay - 1 for Setpoint - 1, Relay - 2 for Setpoint - 2 with 5A Rating
Relay Hysterisis: 0 to 5 pH (user adjustable)(only for High & Low control modes)
Optional Re. Tx. output: Galvanically Isolated 4 - 20 mA
Optional Comm. output: Isolated RS 485
Operating environment: -10 to 50ºC / 10 to 95 % RH Non Condensing
Due to continuous product improvements, Published specifications may change with out notice
Standard Delivery
Basic Instrument
Magnifier
Magnifier stand set
Electronic Marker Pen
Instruction manual
