Dry Block Temperature Calibrators
Dry Block Temperature Calibrators
Dry Block Temperature Calibrators

ACC 1500 Autoclave controller offer extreme reliability and low cost for Autoclave controller. ACC 1500 can be used with RTD PT 100 sensors. Micro controller based electronics ensures accurate readings for Temperature indication. A number of programmable features including In-line calibration are standard. All the parameters are saved in a non volatile EEPROM memory which doesn't needs any external battery.

 Drinking Water plant
RO Water Treatment
Sewage Water
Pharmaceutical
Plating
Health Care

New modern look with 16 Character x 4 Line LCD Display
Temperature, inbuilt Timer water low level & door with Up / Down count selection open limit switch inputs & Pressure all in one Pressure Indicator (Auto Calculated from controller
Easy Front key Process Start / Stop
Auto heater cut off when water low, Door Open, unit Process End
In build alarm buzzer for water low, Door Open, user preset able delay 1 - 100 mins Process End
RTD - PT 100 sensor input
Temperature Range 0 to 200.0°C
0.1 / 1 °C user selectable resolution
High Accuracy ± 0.5 % of FS
15 Amps Rated Relay or SSR Output for Heater
Advance Auto tune PID temperature control
0 - 9999 mins / secs user selectable soak time
Pressure Indicator (Auto Calculated from temperature
0 - 35.0 PSI / 0 - 250 kPa user selectable Pressure unit
Provided Auto steam pressure Relay Output with user preset able delay 1 - 100 mins
Universal Supply Voltage 90 to 270V AC / DC

Model: ACC 1500
Display: 16 Character x 4 Line LCD
Password Access: Provided for Configuration & User settings
Heater Output: 1 Relay (15A max. load)
Pressure(Auto steam) Output: 1 Relay (5A max. load)
Alarm Output: inbuild buzzer with 12V DC O/P (50 mA max. load)
Water level sensor: Provided for High level
Door Open sensor: Provided Limit switch input (NO)
Temp. sensor: RTD - PT 100 (3 wire)
Temp. range: 0 to 200.0°C
Temp. Accuracy: ± 0.1 % of FS
Pressure: Auto calculating from temperature reading
Pressure Range: 0 to 35 PSI / 0 to 250 kPa (user selectable)
Mounting: Panel Mounting
Overall Dimension: 96 x 96 x 85(W x H x D) mm
Cutout Dimension: 90 x 90(W x H) mm
Operating Environment: 0 to 50°C / 20 to 95 % RH non condensing

Due to continuous product improvements, Published specifications may change with out notice

Standard Delivery

Drinking water
Pharmaceutical