- Home
- / Products
The pH 600 - 1 series of pH Controller and Transmitter provides a reliable method of Monitoring, Controlling & Transmitting 4 - 20mA / RS 485 MODBUS RTU communication for Interfacing to PLC, Data logger, HMI, etc.,. This product is suitable to measure pH in water treatment, Electrolytic water cleaning, Chemical Industries, Food Process, Waste Water treatment, Textile Industries & Neutralization process, etc.,.
This pH Controller & Transmitter can Measured using Industrial Combined pH Sensors, Temperature can be measured using temperature sensor. This pH Controller & Transmitter has many User Friendly and Safety Features Which as Follows.
B.O.D incubators
Ovens
Furnaces
Autoclave controllers
All kind of temperature control
3½ Digit seven segment LED display
RTD - PT100 , TC- J,K inputs (any one)
Resolution for RTD100 0.1/1°C and TC 1°C
1 Control output with Relay(5A Rated) or SSR(optional
ON/OFF or PD control mode (any one)
Heat or Cool control action (factory preselectable)
User adjustable cyclic time delay
User calibration provided
Supply voltage 90 to 230 V AC / 50Hz
Model: TC 70
Display: 3 ½ Display 0.5” Red seven segment LED
Resolution: RTD 0.1/1°C (anyone) (or) TC- 1°C
Range: PT 100 - -199.9 to +199.9°C (or) -200 to +400°C
TC - J - 0 to 400°C , TC - K - 0 to 1200°C
Input: PT 100/ J/ K (factory preselect able)
Control mode: ON/OFF or PD (factory preselect able)
Control action: Heat or Cool (factory preselect able)
Relay output: 1 No,1NC 5A Rated max
SSR output: 12V DC ± 10% (50mA max)
Working temperature: 0-50° C<
Power supply: 90 to 230 AC / 50HZ
Overall dimension: 72x72x110 mm
Cut out dimension: 68x68 mm
Weight: 494 gm s
Zero Calibration
Short the TC input connection then adjust ‘ Z ’ pot meter if any variation in the ambient temperature.
Span Calibration
If any error in maximum temperature adjust the ‘ S ’ pot meter
Note:
Relay or SSR any one Output factory selectable against order
Due to continuous product improvements, published specificationmay charge with out notice
