- Home
- / Products

Exact Temperature Measurement and Monitoring are Must in Applications Crucial to Operational Safety of Machinery and Industrial Installations.
Regular Inspection of the Temperature Sensors Used in these Applications is Absolutely Essential for Economic and Technical - Safety Reasons and is Already Prescribed as Obligatory in Many Sectors.
For Inspection of
Thermometers
Inspection is Performed by Comparison of the Temperature Measured by test Piece and the Block Temperature Indicated by the Calibrator or Compression with master thermocouple reading.
Thermocouples
A separate Temperature Measuring Instruments is Required for Inspection. The Inspection is Performed by Comparison of the Temperature Indicated on the External Measuring Instrument with the Reference Temperature of the Calibrator.
SANSEL” Series TCAL 1500 / 1500 is a Micro controller Based Precision “Dry Block” Temperature Calibrators Generates True Reference Temperature. The Temperature Controller of the Calibrators Uses a Auto Tune PID Controller Algorithm. This Response Closely Follows the Heating Curve of an Actual Thermal System.
Place the Sensor to be Calibrated in the Calibrator. Set the Temperature from 4.3 inch Touch screen . Both True and set Temperature can be Read. When Stabilization Occurs, Simply Read the Temperature and Re- Calibrate the Process System or sensor. TCAL 1500 / 1500 Calibrator may be Used for Calibration of all Type of temperature sensors above 500°C to 1500°C range - K, R, S, B, etc
- Range from 500 to 1500°C
- Resolution 0.1°C
- Stability to ±0.5°C
- Accuracy better than 0.5% of reading
- PC Interface RS 485 (optional)
- No Liquids, Safe dry Calibration
- Temperature Switch Test
- NABL Traceable Calibration Certificate
- Semi Portable & Rugged
Model: TCAL 1500 / 1500
Temperature Range: 500 to 1500 °C
Bath Temperature Control: Digital Temperature Controller with Auto Tune PID Algorithm
Resolution: 0.1 °C
Stability: ± 0.5 °C
Accuracy: better than ± 0.5 % of reading
Temperature Read Out: °C / °F
Display: 4.3 inch True TFT DISPLAY with touch screen
Heating Time (to Max): 60 Minutes to 3 ½ Hrs ( Amb. to 1500 °C)
Time to Stabilize (mins): 30 (mins)
Well Depth: 215mm
Inter changeable Thermo Well: 6,8,10,14,18,22, in mm (Approx)
Dimension (L*W*H)in mm (Approx.): 520 L X 410 W X 625 H (mm)
PC Interface: RS 485 (optional)
Power Supply: 230V AC or 110 V AC 50/60 Hz
Switch test: Provided
Power Consumption:3500 VA
Instrument Weight (Approx): 48 Kg (Approx.) with out well insertion
Due to continuous product improvements, Published specifications may change with out notice
Standard Delivery
Basic Instrument
Spare Fuses
Mains Card
Cable for Thermostat Switch Test
Instruction Manual
Tool for Insertion Tube
Traceable Calibration Certificate
Optional
Carrying Case
NABL Certificate
110V AC 60Hz Power supply
Additional Thermowells / Insertion Tubes (as per customer requirements
Reference Standard Thermocouple